Tel: 0203 432 2679

Caterham Lotus 7 Style Front Cycle Wing Mudguards Carbon Wet Lay CSR 15" (Pair)

Availability: Out of stock


Be the first to review this product

CSR Front Cycle Wing Mudguards made from wet lay carbon fibre

Caterham Lotus 7 Style Front Cycle Wing Mudguards Carbon Wet Lay CSR 15" (Pair)

Click on above image to view full picture

  • 15" Arches on 195/50 R15 Tyres
  • 15" Arches on 195/50 R15 Tyres
  • 15" Arches on 195/50 R15 Tyres
  • 15" Arches on 195/50 R15 Tyres



These CSR Style Wet Lay Carbon Front Cycle Wing Mudguards are designed for any Lotus 7 replica kit car.  They will fit your Caterham, Westfield, Indy, Haynes Roadster, Locost, Ron Champion etc.

These are hand made using a wet lay process which could show visible signs of distortion in the carbon weave and possible air bubbles.  It is made using a very similar process to fibreglass.  To obtain weight saving over regular fibreglass, they are not backed with as many layers so you may be able to see light through the carbon fibre weave when held up to the light which can be resolved on an individual basis by painting the inside of the wheel arch.
We cannot guarantee a "Formula 1" finish on these parts, and this is reflected in their price point.

If you want a cheap carbon fibre looking wheel arch, this is the product for you.  If you are looking for a show car finish on your wheel arches, please see our infusion carbon fibre front wheel arches which are exactly the same, but made using a different technique.

The internal dimensions of the CSR Style Carbon Front Cycle Wing Mudguards measure 220mm wide x 815mm long.  These are the same width as the smaller 13" CSR front wings, only slightly longer to cut down on water spray from the race track.

For those of you trying to strip weight from your race car, each of these wheel arches weigh approx: 500g.

Note : When entering the IVA u clip edging will need to finish off the edges so the vehicle does not fail on sharp edges.

All of our products are handmade by hand. As a result of this process, minor changes as well as slight, hardly detectable irregularities (distortions / bulges in the fabric, minor scratches, etc.) can occur from part to part.

We understand that you, as an enthusiastic enthusiast, buy our products as you admire the uniqueness of every handmade product we sell. At the same time, however, it is very important to us that this is properly understood, since every single piece is handmade. Details are not as flawless as machine-made and discrepancies in design might also occur.

Please note : These products are made to order so please be aware the lead time will be 14 - 28 working days

Additional Information

Manufacturer Lotus
Material Carbon Wet Lay

Product Tags

Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.